Download     Notice     Contact Us    Sitemap
Home About Energetic Products Services Contact Us
  +Custom-made rubber part
    -  Rubber&PU spider
  +General Plastic
    -  HIPS Sheets & Rods
    -  ABS Sheet & Rods
    -  PVC Sheets & Rods
    -  PP Sheets & Rods
    -  HDPE Sheets & Rods
  +Engineering Plastic
    -  POM Sheets & Rods
    -  Nylon Sheets & Rods
    -  PC Sheets & Rods
    -  PTFE Sheets & Rods
    -  UHMWPE Sheets & Rods
    -  PVDF Sheets & Rods
  +High Performance Plastic
    -  PPS Sheets & Rods
    -  PEEK Sheets & Rods
    -  PEI Sheets
  +Insulation Materials
    -  Solder Pallet Material
    -  Epoxy Sheets & Rods FR4
    -  Epoxy sheets & rods 3240
    -  Phenolic Cotton Sheet 3025
    -  Phenolic Paper Sheets
    -  Cloth Based Solder Pallet Material
Nylon Sheets & Rods

Polyamides/PA/Nylon Rod, Nylon Sheet


Trade names:

Polyamides, PA, Nylon


Available Shapes:

Sheets, Rods, Tubes, Plates


Natural White, Black, Green, Others

Sheets Thickness:

0.3mm ~ 200mm

Rods Diameter:

0.5mm ~ 400mm

Similar plastics:

Acetal, Oil Filled Nylon


About Nylon Sheet & Rod:


The most common engineering nylons are PA6 and PA66. Nylon stock shapes are produced by either extrusion or casting. The process is in part a determinant of the nylon properties of the end product. Modifiers are added to enhance desirable characteristics.




Nylon Rod and Nylon Sheet  are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environment.




Poor dimension stability, electrical and mechanical properties, may become affected by absorbing moisture or water,  acidproof ability not good, can’t dye with acid or touch overmuch acid, weak lightfastness, low endurance in pollution


Key Features:

            Excellent bearing properties

            High impact strength and toughness

            Low power factor requirements

            High wear resistance

            Very good sliding properties



          High load bearings

          Wear pads

          Support and Guide wheels

          Conveyor and Tension rollers

          Wire rope sheaves

          Buffer pads

          Gears, etc.


Nylon Products:


          Extruded Nylon 6 (PA 6) - natural (white) / black:

Offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with a favourable electrical insulating ability and a good chemical resistance make extruded nylon 6 a "general purpose" grade for mechanical construction and maintenance.


          MC Nylon 6 (PA 6) - natural (ivory) / black:

Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of nylon 66. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ageing properties and machinability.


          MC Nylon 6 + oil filled (PA6 + oil) - green:

This internally lubricated cast nylon 6 is self-lubricating in the real meaning of the word. Oil filled MC nylon 6, especially developed for unlubricated, highly loaded and slowly moving parts applications, yields a considerable enlargement of the application possibilities of nylons. This because of its reduced coefficient of friction (up to -50%) and improved wear resistance (up to x 10).


          Nylon 6 + MOS2 (PA6 + MoS²) – grey black:

The addition of MoS² renders this material somewhat stiffer, harder and dimensionally more stable than nylon 66, but results in some loss of impact strength. The nucleating effect of the molybdenum disulphide results into an improved crystalline structure enhancing bearing and wear properties.


          Nylon 6+ GF30 (PA 6-GF30) - black:

when compared with virgin nylon 6, this 30% glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an excellent wear resistance. It also allows higher max. service temperatures.


          Nylon 66: this material with a higher mechanical strength, stiffness, heat and wear resistance than extruded nylon 6. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes.


Key Words: pa6 sheet, pa6 rod, nylon 6 sheet, nylon 6 rod, polyamid sheet, polyamid rod, pa6 board, pa6 plate, nylon board, nylon plate, pa6 bar, nylon 6 bar, poliamid bar, polyamide sheet, polyamide board, polyamide plate, polyamide rod, polyamide bar, mc nylon sheet, mc nylon rod,

Oil filled nylon sheet, oil filled nylon rod, 30gf nylon sheet, 30gf nylon rod.


Note: Usually, the color and length can be customized, width will according to the avaible extrusion mould. Tolerance for length, width, diameter and thickness may vary when manufacturing. Details please call at +86-755-28326940 or email us to

  Web Sitemap | Contact Us ...

©2012   康元会电器有限公司 版权所有  ICP05108127